DXE 9 Series Wafer Expander

The DXE 9 Series Wafer Expander is used for expanding wafers after the singulation/dicing process. The automation introduced in the DXE 9 Series ensures process efficiency and repeatability.
  • Features
    • Utilizes pneumatic actuators to lower the top lid down to the heated chuck
    • Provides consistent and even pressure
    • Creates a uniform expansion across the wafer
  • Specifications


    Product Specifications
    Power Required 100/120 VAC 3 amp OR 220/240 VAC 1.5 amp, 50/60Hz
    Operating Temperature 150 +/- 5° F (66+/- 2.5°C)
    Air Pressure 80 psi
    Dimensions Height: 15" (381 mm), Width: 17.5" (445 mm), Depth: 18.5" (470 mm)
    Although the information and recommendations set forth herein are presented in good faith and believed to be correct, Dynatex International makes no representations as to their completeness or accuracy. Information is supplied upon the condition that the persons receiving will make their own verification and determination as to its suitability for their purposes prior to use. In no event will Dynatex International be responsible for damages of any nature whatsoever resulting from the use of or reliance upon this information. NO REPRESENTATION OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR PRODUCT TO WHICH INFORMATION REFERS.
  • Applications
    • Laser Diodes
    • LEDs
    • MEMS
    • Transfer of wafers from film frames to hoops
    • Wafer mounting
  • Downloads

Contact Us

Call 707-542-4227 or send us a message below.
  • Required fields are indicated by an asterisk (*)
Please fill out the form below to download files
Tap to Call Tap to Email