StripAid™ X Solvent

StripAid X Solvent is a biodegradable hydrocarbon used for debonding the temporary adhesive WaferGrip. The non-hazardous formulation makes StripAid X Solvent a popular choice for processes in which environmental impact is a particular concern.
  • Specifications


    Product Specifications
    Specific Gravity @ 68°F 0.97
    Density @ 68°F (lbs/gallon) 8.1
    Solubility in Water Negligible
    Water Solubility in Strip Aid @25°C (% by weight) 0.2
    Absolute Viscosity 68°F (cSt) 55
    Flash Point (°C) 212
    Vapor Pressure Negligible
    Color Cloudy
    Odor Mild
    Other Contains no animal by-products
    Although the information and recommendations set forth herein are presented in good faith and believed to be correct, Dynatex International makes no representations as to their completeness or accuracy. Information is supplied upon the condition that the persons receiving will make their own verification and determination as to its suitability for their purposes prior to use. In no event will Dynatex International be responsible for damages of any nature whatsoever resulting from the use of or reliance upon this information. NO REPRESENTATION OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR PRODUCT TO WHICH INFORMATION REFERS.
  • Applications
    StripAid X Solvent is specially formulated to remove WaferGrip Adhesives. The recommended process steps are:
    1. Soak in StripAid at 110° C for 5 to 20 minutes
    2. Soak in clean StripAid at 110° C for 5 to 20 minutes
    3. Acetone rinse
    4. IPA rinse
    5. DI water rinse
  • Downloads

Contact Us

Call 707-542-4227 or send us a message below.
  • Required fields are indicated by an asterisk (*)
Please fill out the form below to download files
Tap to Call Tap to Email